Light Dep, Roll Ups & Fans Greenhouse Poly, Coverings & Fabrics Thermal Vent Openers Greenhouses, Tunnels & Components

Contents:

 

Roll Up Motor, partial install kits for Venting
Roll Up Motor, partial install kits for Venting
 
Alternative Views:
Price: $15.75


Product Code: VERUT-PART
Qty:

Description
 
Hardware to install the roll up motors for a venting application.
Tubes supplied by the customer.

For houses made with 1-3/8" tube:
Ideally, the threaded-connector is installed 1 foot above the top of the roll up wall - this will allow the fullest opening. The loose-end must be very close to grade - so the wall can fully close.
The threaded-connector sits between the arch and the springwall base - to do: un-attach the poly; partially raise a screw and wiggle the bracket in place.
The1/2" EMT can either be drilled, as the tube below - or you can tap a brace pin in. To install a brace pin slightly ovalize the end of the tube with vice grips or a vice; brace the tube against something solid and tap the pin squarely (so as not to bend the pin over) till it is snug.

Share your knowledge of this product. Be the first to write a review »